HTS Chapter 72 — duty rates by code

USITC 2026HTSRev10 · 950 lines. Each code links to its current duty picture and recent changes.

7201.10.00.00 — Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus
7201.20.00.00 — Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus
7201.50.30.00 — Alloy pig iron
7201.50.60.00 — Spiegeleisen
7202.11.10.00 — Containing by weight more than 2 percent but not more than 4 percent of carbon
7202.11.50.00 — Containing by weight more than 4 percent of carbon
7202.19.10.00 — Containing by weight not more than 1 percent of carbon
7202.19.50.00 — Containing by weight more than 1 percent but not more than 2 percent of carbon
7202.21.10.00 — Containing by weight more than 3 percent of calcium
7202.21.50.00 — Other
7202.21.75.00 — Containing by weight more than 80 percent but not more than 90 percent of silicon
7202.21.90.00 — Containing by weight more than 90 percent of silicon
7202.29.00 — Other
7202.30.00.00 — Ferrosilicon manganese
7202.41.00.00 — Containing by weight more than 4 percent of carbon
7202.49.10.00 — Containing by weight more than 3 percent of carbon
7202.49.50 — Other
7202.50.00.00 — Ferrosilicon chromium
7202.60.00.00 — Ferronickel
7202.70.00.00 — Ferromolybdenum
7202.80.00.00 — Ferrotungsten and ferrosilicon tungsten
7202.91.00.00 — Ferrotitanium and ferrosilicon titanium
7202.92.00.00 — Ferrovanadium
7202.93.40.00 — Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
7202.93.80.00 — Other
7202.99.10.00 — Ferrozirconium
7202.99.20.00 — Calcium silicon
7202.99.80 — Other
7203.10.00.00 — Ferrous products obtained by direct reduction of iron ore
7203.90.00.00 — Other
7204.10.00.00 — Waste and scrap of cast iron
7204.21.00.00 — Of stainless steel
7204.29.00.00 — Other
7204.30.00.00 — Waste and scrap of tinned iron or steel
7204.41.00 — Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49.00 — Other
7204.50.00.00 — Remelting scrap ingots
7205.10.00.00 — Granules
7205.21.00.00 — Of alloy steel
7205.29.00.00 — Other
7206.10.00.00 — Ingots
7206.90.00.00 — Other
7207.11.00.00 — Of rectangular (including square) cross section, the width measuring less than twice the thickness
7207.12.00 — Other, of rectangular (other than square) cross section
7207.19.00 — Other
7207.20.00 — Containing by weight 0.25 percent or more of carbon
7208.10.15.00 — Pickled
7208.10.30.00 — Of a thickness of 4.75 mm or more
7208.10.60.00 — Of a thickness of less than 4.75 mm
7208.25.30.00 — Of high-strength steel
7208.25.60.00 — Other
7208.26.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7208.27.00 — Of a thickness of less than 3 mm
7208.36.00 — Of a thickness exceeding 10 mm
7208.37.00 — Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.38.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7208.39.00 — Of a thickness of less than 3 mm
7208.40.30 — Of a thickness of 4.75 mm or more
7208.40.60 — Of a thickness of less than 4.75 mm
7208.51.00 — Of a thickness exceeding 10 mm
7208.52.00.00 — Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.53.00.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7208.54.00.00 — Of a thickness of less than 3 mm
7208.90.00.00 — Other
7209.15.00.00 — Of a thickness of 3 mm or more
7209.16.00 — Of a thickness exceeding 1 mm but less than 3 mm
7209.17.00 — Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.18.15 — Of high-strength steel
7209.18.25 — Of a thickness of less than 0.361 mm (blackplate)
7209.18.60 — Other
7209.25.00.00 — Of a thickness of 3 mm or more
7209.26.00.00 — Of a thickness exceeding 1 mm but less than 3 mm
7209.27.00.00 — Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.28.00.00 — Of a thickness of less than 0.5 mm
7209.90.00.00 — Other
7210.11.00.00 — Of a thickness of 0.5 mm or more
7210.12.00.00 — Of a thickness of less than 0.5 mm
7210.20.00.00 — Plated or coated with lead, including terne-plate
7210.30.00 — Electrolytically plated or coated with zinc
7210.41.00.00 — Corrugated
7210.49.00 — Other
7210.50.00 — Plated or coated with chromium oxides or with chromium and chromium oxides
7210.61.00.00 — Plated or coated with aluminum-zinc alloys
7210.69.00.00 — Other
7210.70.30.00 — Not coated or plated with metal and not clad
7210.70.60 — Other
7210.90.10.00 — Clad
7210.90.60.00 — Electrolytically coated or plated with base metal
7210.90.90.00 — Other
7211.13.00.00 — Universal mill plate
7211.14.00 — Other, of a thickness of 4.75 mm or more
7211.19.15.00 — Of high-strength steel
7211.19.20.00 — Of a thickness exceeding 1.25 mm
7211.19.30.00 — Other
7211.19.45.00 — Of high-strength steel
7211.19.60.00 — Pickled
7211.19.75 — Other
7211.23.15.00 — Of high-strength steel
7211.23.20.00 — Other
7211.23.30.00 — Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7211.23.45.00 — Of a thickness not exceeding 0.25 mm
7211.23.60 — Other
7211.29.20 — Of a thickness exceeding 0.25 mm
7211.29.45.00 — Other
7211.29.60 — Other
7211.90.00.00 — Other
7212.10.00.00 — Plated or coated with tin
7212.20.00.00 — Electrolytically plated or coated with zinc
7212.30.10 — Of a thickness exceeding 0.25 mm or more
7212.30.30.00 — Other
7212.30.50.00 — Other
7212.40.10.00 — Of a width of less than 300 mm
7212.40.50.00 — Other
7212.50.00.00 — Otherwise plated or coated
7212.60.00.00 — Clad
7213.10.00.00 — Concrete reinforcing bars and rods
7213.20.00 — Other, of free-cutting steel
7213.91.30 — Not tempered, not treated and not partly manufactured
7213.91.45.00 — Containing by weight 0.6 percent or more of carbon
7213.91.60.00 — Other
7213.99.00 — Other
7214.10.00.00 — Forged
7214.20.00.00 — Concrete reinforcing bars and rods
7214.30.00 — Other, of free-cutting steel
7214.91.00 — Of rectangular (other than square) cross-section
7214.99.00 — Other
7215.10.00 — Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.50.00 — Other, not further worked than cold-formed or cold-finished
7215.90.10.00 — Not cold-formed
7215.90.30.00 — Cold-formed
7215.90.50.00 — Other
7216.10.00 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.00.00 — L sections
7216.22.00.00 — T sections
7216.31.00.00 — U sections
7216.32.00.00 — I sections (standard beams)
7216.33.00 — H sections
7216.40.00 — L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.50.00.00 — Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.61.00.00 — Obtained from flat-rolled products
7216.69.00.00 — Other
7216.91.00 — Cold-formed or cold-finished from flat-rolled products
7216.99.00 — Other
7217.10.10.00 — Of a thickness not exceeding 0.25 mm
7217.10.20.00 — Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7217.10.30.00 — Of a thickness exceeding 1.25 mm
7217.10.40 — With a diameter of less than 1.5 mm
7217.10.50 — With a diameter of 1.5 mm or more
7217.10.60.00 — Other wire
7217.10.70.00 — Flat wire
7217.10.80 — Round wire
7217.10.90.00 — Other wire
7217.20.15.00 — Flat wire
7217.20.30.00 — With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
7217.20.45 — Other
7217.20.60.00 — Containing by weight less than 0.25 percent of carbon
7217.20.75.00 — Other
7217.30.15 — Flat wire
7217.30.30.00 — With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
7217.30.45 — Other
7217.30.60.00 — Containing by weight less than 0.25 percent of carbon
7217.30.75.00 — Other
7217.90.10.00 — Coated with plastics
7217.90.50 — Other
7218.10.00.00 — Ingots and other primary forms
7218.91.00 — Of rectangular (other than square) cross-section
7218.99.00 — Other
7219.11.00 — Of a thickness exceeding 10 mm
7219.12.00 — Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.13.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7219.14.00 — Of a thickness of less than 3 mm
7219.21.00 — Of a thickness exceeding 10 mm
7219.22.00 — Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.00 — Of a thickness of less than 3 mm
7219.31.00 — Of a thickness of 4.75 mm or more
7219.32.00 — Of a thickness of 3 mm or more but less than 4.75 mm
7219.33.00 — Of a thickness exceeding 1 mm but less than 3 mm
7219.34.00 — Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.35.00 — Of a thickness of less than 0.5 mm
7219.90.00 — Other
7220.11.00.00 — Of a thickness of 4.75 mm or more
7220.12.10.00 — Of a width of 300 mm or more
7220.12.50.00 — Of a width of less than 300 mm
7220.20.10 — Of a width of 300 mm or more
7220.20.60 — Of a thickness exceeding 1.25 mm
7220.20.70 — Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
7220.20.80.00 — Razor blade steel
7220.20.90 — Other
7220.90.00 — Other
7221.00.00 — Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222.11.00 — Of circular cross-section
7222.19.00 — Other
7222.20.00 — Bars and rods, not further worked than cold-formed or cold-finished
7222.30.00 — Other bars and rods
7222.40.30 — Hot-rolled, not drilled, not punched and not otherwise advanced
7222.40.60.00 — Other
7223.00.10 — Round wire
7223.00.50.00 — Flat wire
7223.00.90.00 — Other
7224.10.00 — Ingots and other primary forms
7224.90.00 — Other
7225.11.00.00 — Grain-oriented
7225.19.00.00 — Other
7225.30.11 — Of tool steel
7225.30.30 — Other
7225.30.51 — Of tool steel
7225.30.70.00 — Other
7225.40.11 — Of tool steel
7225.40.30 — Other
7225.40.51 — Of tool steel
7225.40.70.00 — Other
7225.50.11 — Of tool steel
7225.50.60.00 — Of a thickness of 4.75 mm or more
7225.50.70.00 — Heat-resisting steel
7225.50.80 — Other
7225.91.00.00 — Electrolytically plated or coated with zinc
7225.92.00.00 — Otherwise plated or coated with zinc
7225.99.00 — Other
7226.11.10.00 — Of a width of 300 mm or more
7226.11.90 — Of a width of less than 300 mm
7226.19.10.00 — Of a width of 300 mm or more
7226.19.90.00 — Of a width of less than 300 mm
7226.20.00.00 — Of high-speed steel
7226.91.05.00 — Of chipper knife steel
7226.91.15 — Of a width of 300 mm or more
7226.91.25 — Of a width of less than 300 mm
7226.91.50.00 — Of a thickness of 4.75 mm or more
7226.91.70.00 — Of a width of 300 mm or more
7226.91.80.00 — Of a width of less than 300 mm
7226.92.10 — Of a width of 300 mm or more
7226.92.30 — Of a width of less than 300 mm
7226.92.50.00 — Of a width of 300 mm or more
7226.92.70 — Of a thickness not exceeding 0.25 mm
7226.92.80 — Of a thickness exceeding 0.25 mm
7226.99.01 — Other
7227.10.00.00 — Of high-speed steel
7227.20.00 — Of silico-manganese steel
7227.90.10 — Not tempered, not treated, and not partly manufactured
7227.90.20 — Other
7227.90.60 — Other
7228.10.00 — Bars and rods, of high-speed steel
7228.20.10.00 — Not cold-formed
7228.20.50.00 — Cold-formed
7228.30.20.00 — Of ball-bearing steel
7228.30.40.00 — Of chipper knife steel, not cold-formed
7228.30.60.00 — Other
7228.30.80 — Other
7228.40.00.00 — Other bars and rods, not further worked than forged
7228.50.10 — Of tool steel (other than high-speed steel)
7228.50.50 — Other
7228.60.10 — Of tool steel (other than high-speed steel)
7228.60.60.00 — Not cold-formed
7228.60.80.00 — Cold-formed
7228.70.30 — Hot-rolled, not drilled, not punched and not otherwise advanced
7228.70.60.00 — Other
7228.80.00.00 — Hollow drill bars and rods
7229.20.00 — Of silico-manganese steel
7229.90.05.00 — Of high-speed steel
7229.90.10.00 — Flat wire
7229.90.50 — Round wire
7229.90.90.00 — Other wire

Operated by FOOM — an AI-operated, human-supervised autonomous service. Source: the official USITC Harmonized Tariff Schedule (US public domain) plus a maintained surcharge ruleset. Informational only — not customs, legal, or financial advice.